resolve|690x314

Installing DaVinci Resolve in Linux is not the easiest thing to do despite having native support. Resolve is a professional level video editor that requires a very specific environment to run properly. Below are the minimum requirements.

Minimum system requirements for Linux

CentOS 7.3
16-32 GB of system memory
Discrete GPU with at least 2GB of VRAM
GPU which supports OpenCL 1.2 or CUDA 11
NVIDIA/AMD Driver version – As required by your GPU

*Important Note: Using the free version of DaVinci Resolve in Linux will require the use of uncompressed .mov files. These file sizes are LARGE, around 5-30gb for a 10min video. If this is a no go for you I’d recommend Kdenlive.*

As you can see there are some hefty requirements for the software. This application will not run on integrated graphics and it’s very specific on the CentOS requirement. Luckily their are tools and other options for installing Resolve on Fedora, Debain/Ubuntu, and Arch based systems.

As of writing this, I’ve only had repeated success installing DaVinci Resolve with an AMD GPU in a Arch Linux system. So please refer the the Arch guide below if you’re running team red.

Fedora (NVIDIA)

If you are running Fedora AND have a NVIDIA GPU in you’re system you are in the best spot when it comes to running Resolve. Fedora and CentOS both fall under the umbrella of Red Hat Linux. Fedora is developed by the community backed Fedora project with this comes similar code thus we are able to use the files directly from Blackmagic Design.

First make sure you have the proper drivers. You’ll need RPM Fusion enabled [video insert]. I recommend following the [wiki], but you’ll need CUDA driver for sure. Install it using the command below.

sudo dnf install xorg-x11-drv-nvidia-cuda

Once you have the NVIDIA drivers properly set up on your system you’re you’re going to want to head over to Go to Blackmagic Design and download the official installer *.zip archive. Once downloaded open the terminal, go to the download directory and extract the files.

cd ~/Downloads
unzip DaVinci_Resolve_Studio_17.1.1_Linux.zip

Now we need to make sure the installer .run file can be extracted.

sudo chmod +x DaVinci_Resolve_17.1.1_Linux.run

Now, we will run this command to execute the installer.

sudo ./DaVinci_Resolve_17.1.1_Linux.run

When the installer opens running though it is fairly simple. Hit next, skim though the read me, agree to their terms of service, and click start install. And that’s it launch the application and have fun.

Fedora (AMD)

I had success one time using this guide on Reddit. When I tried to do it a second time my drivers had a error there was a white screen on boot. Proceed with caution and make sure your system is backup up with Timeshift or another tool. I do not recommend this, but here is the resource.

GUIDE : Installing OpenCL alongside Mesa drivers for Blender/Darktable. Fedora and RHEL (Updated 2021)

Debian/Ubuntu (NVIDIA)

First lets update our system and grab some dependencies.

sudo apt update
sudo apt upgrade
sudo apt-get install fakeroot xorriso

Now, lets make sure we have the proper NVIDIA drivers installed.

sudo apt-get install nvidia-driver nvidia-opencl-icd libcuda1 libglu1-mesa
sudo apt-get install libnvidia-encode1

Next you’re going to want to head over to Go to Blackmagic Design and download the official installer *.zip archive. Then head over to https://www.danieltufvesson.com/makeresolvedeb and download the latest MakeResolveDeb into the same directory.

Now we are going to want to extract the archived files we downloaded. Easiest way is to open a terminal application and run the following command. Change directory as needed.

cd ~/Downloads
unzip DaVinci_Resolve_Studio_17.1.1_Linux.zip
tar zxvf makeresolvedeb_1.5.0_multi.sh.tar.gz

Once extacted you should have these two files in the directory.

DaVinci_Resolve_Studio_17.1.1_Linux.run
makeresolvedeb_1.5.0_multi.sh

With the terminal open in the correct directory we are going to use the makesolvedeb script to convert the .run file into a proper installation file for debian based systems. Run the following command.

./makeresolvedeb_1.5.0_multi.sh DaVinci_Resolve_Studio_17.1.1_Linux.run

This will take a bit and be resource intensive. When indicated by the last line saying “[DONE]” and the reported number of errors 0 you can move on to the next step.

Now we will use dpkg to install the Debian package. Make sure you replace the file name with the proper version.

sudo dpkg -i davinci-resolve_17.1.1-mrd1.0_amd64.deb

That’s it! The package is installed and it should open with no errors if everything was set up correctly. Please note, occasionally there are issues with the first welcome screen. You may need to force close this and re-open the application.

Most content in this section was pulled from https://www.danieltufvesson.com/makeresolvedeb please refer here for updated information, and FAQ.

Arch Linux (NVIDIA and AMD)

First, lets get our proper GPU drivers. One of the awesome things about Arch is the AUR and the community around it. Luckily for us the Arch community has packaged the amdgpu-pro drivers so it’s an easy installation. You will need AUR access so make sure you have yay or pamac.

AMD GPU Drivers

yay -S amdgpu-pro-libgl opencl-amd

NVIDIA GPU Drivers

pacman -Syu nvidia nvidia-utils opencl-nvidia

Now that we have the proper drivers the AUR is going to come in again to help us out. Just run the command below to install resolve. As a reminder if you paid for the full version you’ll want the -studio package. For the free version, install davinci-resolveAUR and for the Studio version, install davinci-resolve-studioAUR

yay -S davinci-resolve

And that it! You have it installed. If you’re running a AMD card their are a few more things to do as this will require the progl script to run.

To launch DaVinci Resolve with the AMD pro drivers you will need to run this in termial.

progl /opt/resolve/bin/resolve

You will notice opening the .desktop application with application menus will result in… nothing happening. We need to fix this by adding the progl command to our .desktop file within usr/share/applications. Open terminal and run the following command,

sudo nano usr/share/applications/com.blackmagicdesign.resolve.desktop

You should see something that looks like this in nano:

[Desktop Entry]
Version=1.0
Type=Application
Name=DaVinci Resolve
GenericName=DaVinci Resolve
Comment=Revolutionary new tools for editing...>
Path=/opt/resolve/
Exec=/opt/resolve/bin/resolve %u
Terminal=false
MimeType=application/x-resolveproj;
Icon=/opt/resolve/graphics/DV_Resolve.png
StartupNotify=true
Name[en_US]=DaVinci Resolve
StartupWMClass=resolve

All we need to do is add progl after Exec= as if we were running it in termial. Should look something like this.

Exec=progl /opt/resolve/bin/resolve %u

Hit ctrl-o to save out the file. Restart or logout of your desktop environment and it should open with no errors! (Tested this in gnome. To restart press alt+F2 then input ‘r’)

For more information including detailed driver support and other helpful info the Arch wiki is a great place to be: https://wiki.archlinux.org/title/DaVinci_Resolve

If you have any other suggestions, tip, tricks, or updates let us know down below!

本文转自TechHut社区「How to install DaVinci Resolve in Linux」

最近没写什么东西，小惭愧